HTS Texas represents the most energy efficient products in the industry for the following HVAC applications:

• Chillers
  • McQuay WMC (as low as 0.2 KW/TON)
  • Air Cooled Chiller – Pathfinder (as low as 0.55 kw/ton)
  • Chilled Water Central Plants
• Cooling Towers
  • Tower Tech
    • Lowest operating BHP in the industry with lowest make-up water consumption rate
• DX Rooftop Air Handling Equipment
  • McQuay RPS, RDT (as low as 0.85 kw/ton)
  • Addison TRS
• 100% OA Dedicated Outside Air Systems(DOAS)
  • Munters HCU (0.8 kw/ton)
  • Munters DryCool ERV (0.5 kw/ton)
  • Semco Pinnacle System (0.4 kw/ton)
  • Addison TRS
  • United Cool Air – Omega Air
  • Seresco
  • McQuay RPS and Maverick II
• Chilled Water Indoor and Outdoor Air Handling Equipment
  • McQuay Vision and Skyline
  • Haakon Industries AirPak
• Air Turnover (Open Warehouse Manufacturing and Storage)
  • HTS
• Variable Speed Drives
  • Danfoss VLT HVAC
• Natatorium Equipment
  • Seresco
• Hi-Rise Stacked Fan Coils and VAV boxes
  • Environmental Technologies

We define energy efficiency as the following:

1. Reduced peak KW consumption of equipment
   • Air Handling Units
   • Air and Water Cooled Chillers
   • Fan Coil Units
   • 100% Dedicated Outdoor Air Solutions (DOAS)
2. Reduced operating kwh consumption of equipment
   • Air Handling Units
   • Air and Water Cooled Chillers
   • Fan Coil Units
   • 100% Dedicated Outdoor Air Solutions (DOAS)
3. Reduced chilled water consumption of airside equipment
4. Reduced hot water consumption of airside equipment
5. Reduced make-up water consumption for cooling towers, preserving precious environmental resources
6. Reduced Carbon Footprint of HVAC Systems by using the following:
   • Variable Refrigerant Volume Systems
   • Energy Recovery Wheels and Coils
   • Geothermal Heat Pumps
   • Desiccant Dehumidification
7. Reduced Terminal Unit operating kwh consumption
8. Reduced building operating kwh

As part of our extended engineering support we offer analysis on the following:

1. Energy Modeling of Buildings using Energy Pro Software (DOE approved)
2. Energy Analysis of HVAC Systems utilizing McQuay Energy Analyzer
3. BHP/CFM calculation for compliance with ASHRAE 90.1 and LEED Requirements
4. Water Cooled And Air Cooled Chiller Part Load matrix using our 100 pt. operating curve model
5. Rebate calculations and Rebate Coordination of any HVAC equipment with our RebateMaker software