humidity control
Munters DryCool Standard HCU
Dehumidification
Outside air often represents the greatest moisture load to a building. That is why experts agree pre-teating makeup air with a dedicated outside air system (DOAS) is the most efficient and effective approach at managing it. Munters' award winning DryCool™ Standard System removes more moisture with less energy than any other DOAS by combining Munters advanced desiccant dehumidification technology with packaged refrigeration.
Essentially, the DryCool™ Standard is a packaged DX unit enhanced with an active desiccant wheel to reduce cooling requirements by 30-40%.
The DryCool™ Standard utilizes waste condenser heat to reactivate the desiccant wheel. This qualifies it as an "energy recovery" device using "site recovered" energy to boost the moisture removal capacity of the system at reduced cooling tonnage.
Since just one circuit provides all the reactivation energy the DryCool™ Standard needs to continuously satisfy desired supply air conditions, these units are also available as split systems, water and chilled water cooled versions. All configurations can include winter heating options utilizing gas, electric, hot water and steam.
When 100% outside air is not required, the DryCool™ Standard still outperforms other dehumidification systems by delivering drier air while consuming less energy.
Unit installation can be indoors or outdoors. The DryCool™ Standard is available is sizes conditioning up to 16,000 cfm of air.
• Most energy efficient DOAS
• Reduced cooling requirements
• Delivers cool, dry air
• Increases cooling COP
• Qualifies as an energy recovery device when exhaust air is not available
• Air, water and chilled water cooled configurations available
Essentially, the DryCool™ Standard is a packaged DX unit enhanced with an active desiccant wheel to reduce cooling requirements by 30-40%.
The DryCool™ Standard utilizes waste condenser heat to reactivate the desiccant wheel. This qualifies it as an "energy recovery" device using "site recovered" energy to boost the moisture removal capacity of the system at reduced cooling tonnage.
Since just one circuit provides all the reactivation energy the DryCool™ Standard needs to continuously satisfy desired supply air conditions, these units are also available as split systems, water and chilled water cooled versions. All configurations can include winter heating options utilizing gas, electric, hot water and steam.
When 100% outside air is not required, the DryCool™ Standard still outperforms other dehumidification systems by delivering drier air while consuming less energy.
Unit installation can be indoors or outdoors. The DryCool™ Standard is available is sizes conditioning up to 16,000 cfm of air.
• Most energy efficient DOAS
• Reduced cooling requirements
• Delivers cool, dry air
• Increases cooling COP
• Qualifies as an energy recovery device when exhaust air is not available
• Air, water and chilled water cooled configurations available
Projects Using this Product
| ||
| ||
|
||||||||||||||||
HVAC Equipment
Products by Manufacturer
Products by Type
Contact Us
We're here to be a resource for you. How can we help?
| Contact your representative |
| Request a proposal |






